Six double-wide floor plans from 1,456 to 3,274 sq ft. HUD-certified, joined-section construction, foundation install. Real family homes with the spaciousness single-wides can’t deliver.
A double wide mobile home is a HUD-certified manufactured home built in two separate sections at the factory, transported on its chassis, and joined on-site to form a single home typically 28′ wide. Double wides range from 1,400 to 3,300+ sq ft with 2–4 bedrooms and 2 bathrooms. Tiny Homes USA ships six double-wide models starting at $85,899 (The Tonaday, 1,456 sq ft) and topping out at $359,113 (Clayton Atlas, 3,274 sq ft 4BR flagship). All builds carry HUD certification, engineered chassis tie-downs rated to F2 tornado winds, and free delivery within 1,000 miles of our Smithville, TX factory.
Real properties from our 48-model catalog. Click any model to see full specs, photos, and original 250+ word descriptions.
| Attribute | Single Wide | Double Wide |
|---|---|---|
| Width | 14′ max (transport limit) | 28′ (2 sections joined on-site) |
| Typical sq ft | 600–1,200 | 1,400–2,800 |
| Bedrooms | 1–3 | 3–4 |
| Layout | Linear single-corridor | Open great-room + T-layout possible |
| Starting price (Tiny Homes USA) | $55,899 (The Alamo 1423) | $85,899 (The Tonaday) |
| Foundation | Piers or permanent | Permanent only (joined on-site) |
| Lot width needed | 20′+ usable | 50′+ usable (allows setup crane access) |
If you need a 3-bedroom family home with separated sleeping zones, a real great room, and the option of a primary suite with walk-in closet, double-wide is the right answer. Single-wides are better for solo / couple buyers with narrow lots or tight budgets.
Double wide mobile homes from Tiny Homes USA start at $85,899 for the Tonaday (1,456 sq ft, 3BR/2BA) and reach $359,113 for the Clayton Atlas (3,274 sq ft, 4BR/2BA flagship). Typical all-in installed cost on owned rural land (with foundation, utilities already at the lot, basic setup) ranges from $95,000 to $400,000+. Land + home + septic + well packages typically add $25,000–$50,000.
Yes, when installed on a permanent foundation on land you own. HUD-certified double wides qualify as real property in nearly every US county once the chassis is removed (or made non-removable) and the home is title-converted with the county. This unlocks conventional mortgage financing on many double-wide placements. Land + double-wide packages are taxed and financed like traditional homes.
Yes. FHA Title II loans cover HUD-certified manufactured homes on owned land, including double wides. VA loans also extend to qualifying manufactured homes. Both require permanent-foundation install and title conversion to real property. Our financing team handles the paperwork coordination.
Factory build typically takes 10–14 weeks. Transport and on-site setup add another 1–3 weeks: each of the two sections is transported separately under oversize-load permits, then crane-set and joined on-site over 2–5 days. The marriage line (joining seam) is finished out and the home becomes fully weather-tight. Total order-to-move-in timeline: 12–18 weeks.
Most counties require at least a 50′-wide buildable area to accommodate the 28′-wide home plus setbacks. Practical minimum total lot size is around 0.25 acres in suburban placements and 1+ acres for rural. Crane setup needs 60′ of clear overhead and ground access, so wooded lots may need tree-clearing during prep.
We deliver double wides to all 48 contiguous US states. Top destinations from Smithville, TX: Texas, Oklahoma, Arkansas, Louisiana, Mississippi, Alabama, Tennessee, and Georgia (all within free-delivery zone). Rural counties everywhere are the easiest placement; tight-zoned coastal metros are the strictest. We confirm placement viability before deposit.
We’ll send you a delivered-and-installed quote for any model in our double wide mobile homes lineup. No pressure, no sales call — just numbers, your zip code, your timeline.
Or Get your free quote → · One email a week, unsubscribe anytime